Cisco Nexus 9000 Series - Page 78

PurposeCommand or Action
igmp 1 N/A
mrib 2 /procket/shm/mrib-mfdm
This example shows how to display the EIGRP routing protocol configuration:
switch# show running-config eigrp all
version 6.1(2)I1(1)
feature eigrp
router eigrp 99
log-neighbor-warnings
log-neighbor-changes
log-adjacency-changes
graceful-restart
nsf
timers nsf signal 20
distance 90 170
metric weights 0 1 0 1 0 0
metric maximum-hops 100
default-metric 100000 100 255 1 1500
maximum-paths 16
address-family ipv4 unicast
log-neighbor-warnings
log-neighbor-changes
log-adjacency-changes
graceful-restart
router-id 192.0.2.1
nsf
timers nsf signal 20
distance 90 170
metric weights 0 1 0 1 0 0
metric maximum-hops 100
default-metric 100000 100 255 1 1500
maximum-paths 16
This example shows how to display that the unicast routing protocol is registered with the RIB:
switch# show routing unicast clients
CLIENT: am
index mask: 0x00000002
epid: 3908 MTS SAP: 252 MRU cache hits/misses: 2/1
Routing Instances:
VRF: management table: base
Messages received:
Register : 1 Add-route : 2 Delete-route : 1
Messages sent:
Add-route-ack : 2 Delete-route-ack : 1
CLIENT: rpm
index mask: 0x00000004
epid: 4132 MTS SAP: 348 MRU cache hits/misses: 0/0
Messages received:
Register : 1
Messages sent:
...
CLIENT: eigrp-99
index mask: 0x00002000
epid: 3148 MTS SAP: 63775 MRU cache hits/misses: 0/1
Routing Instances:
VRF: default table: base notifiers: self
Messages received:
Register : 1 Delete-all-routes : 1
Messages sent:
...
Cisco Nexus 9000 Series NX-OS Troubleshooting Guide, Release 7.x
66
Troubleshooting Routing
Troubleshooting Routing