Power Specifications
Power specifications include the specifications for each type of power supply module.
500-W AC Power Supply Specifications
These specifications apply to the NXA-PAC-500W power supplies.
SpecificationCharacteristic
Nominal range: 100 and 240 Vac (Range: 90-264 Vac)AC input voltage
Nominal range: 50 to 60 Hz (Range: 47-63 Hz)AC input frequency
5.7 A at 100 VacMaximum AC input current
648 VA, (2.7 A at 240 Vac)Maximum input volt-amperes
500 WMaximum output power per power
supply
33 A (sub-cycle duration)Maximum inrush current
12 ms at 500 WMaximum hold-up time
12 VdcPower supply output voltage
12 VdcPower supply standby voltage
Climate Savers Platinum Efficiency (80Plus Platinum certified)Efficiency rating
RSP1Form factor
1200-W HVAC/HVDC Power Supply Specifications
These specifications apply to the N9K-PUV-1200W power supplies.
SpecificationCharacteristic
• Nominal range: 100-240 Vac (Range: 90-264 Vac)
• Nominal range: 200-277 Vac (Range: 180-305 Vac)
• Nominal range: 240-380 Vdc (Range: 1204-400 Vdc)
Input voltage
• AC (for 1230 W output)
• DC (for 1230 W output)
Nominal: 50 to 60 Hz (Range: 47-63 Hz)AC input frequency
10 A at 100 VacMaximum AC input current
35 A (cold turn on); 70 A (hot turn on)Maximum inrush current
Cisco Nexus 93108TC-FX3 ACI-Mode Switch Hardware Installation Guide
49
System Specifications
Power Specifications