Power Specifications
Power specifications include the specifications for each type of power supply module.
715-W DC Power Supply Specifications
SpecificationProperty
715 WPower
-51V to 57VDC Range
5 A at 240 Vdc and 50 HzInput current
40 to 100 HzFrequency
83% to 89% (20% to 50% load)Efficiency
Combined, n+1, and n+nRedundancy Modes
YesRoHS Compliance
RSP1Form factor
1100-W AC Power Supply Specifications
These specifications apply to all versions of the NXA-PAC-1100W power supply
SpecificationCharacteristic
Nominal range: 100 and 240 VAC (Range: 90-132 VAC, 180-264 VAC)AC input voltage
Nominal range: 50 to 60 Hz (Range: 47-63 Hz)AC input frequency
13 A at 100 VAC
6 A at 240 VAC
Maximum AC input current
1300 VA at 100 VACMaximum input volt-amperes
1100 WMaximum output power per power
supply
33 AMaximum inrush current
12 ms at 1100 WMaximum hold-up time
12 VDCPower supply output voltage
12 VDCPower supply standby voltage
Climate Savers Platinum Efficiency (80Plus Platinum certified)Efficiency rating
Cisco Nexus 93108TC-FX3P ACI-Mode Switch Hardware Installation Guide
49
System Specifications
Power Specifications