Cisco Nexus 93180YC-FX3 - HVAC;HVDC Power Cables Supported by ACI-Mode and NX-OS Mode Switches

Cord Set DescriptionPower Cord Part NumberLocale
No power cord included with switchNO-POWER-CORDAll except Argentina, Brazil,
and Japan
HVAC/HVDCPowerCablesSupportedbyACI-ModeandNX-OSModeSwitches
PhotoCord Set DescriptionPart Number
HVAC
2-foot (0.6 m) cable with
Saf-D-Grid and SD
connectors
277V AC
CAB-HVAC-SD-0.6M
HVAC
6.6-foot (2.0 m) cable
with Saf-D-Grid and C14
(use for up to 240 V)
connector
250V AC
CAB-HVAC-C14-2M
HVAC
2-foot (0.6 m) cable with
Saf-D-Grid and RT
connector
277V AC
CAB-HVAC-RT-0.6M
HVDC
6.6-foot (2.0 m) cable
with Saf-D-Grid and three
terminal connectors
300V AC / 400V DC
(+200/-200 V DC)
CAB-HVDC-3T-2M
Not applicableAll except Argentina,
Brazil, and Japan
No power cord included
with switch
NO-POWER-CORD
Table 4: HVAC/HVDC Power Cables Callout Table
Connect this end to the power supply unit.1
Cisco Nexus 93180YC-FX3 ACI-Mode Switch Hardware Installation Guide
56
System Specifications
HVAC/HVDC Power Cables Supported by ACI-Mode and NX-OS Mode Switches