41
1. Fasten the trim, through a front profile (3203 #5),
with five screws (M4x12, Torx 20).
Repeat the procedure for both the left and
right trims.
2. Fasten the center trim, through a front profile
(3203 #5), with six screws (M4x12, Torx 20).
Add a spacer to
this screw.
Add a spacer to
this screw.
3. Fasten the trim, through a side profile
(3203 #1),
with two screws.
Repeat the procedure for both the left and
right trims.
4. We recommend that you use the laser level to
check that the all profiles are level.
To Next Page
Loading...