48
19.2. Mount a joining module on top of the lower corner panel
Repeat the procedure on both sides.
1. Fasten the vertical profile (
3203 #1) with two
screws (M4x12, Torx 20).
2. Add two screws with spacers (M4x12, Torx 20;
Nylon spacer, 5 mm).
Add spacers to
these screws.
3. Fasten the two horizontal profiles (3201 #3) with
two screws (M4x12, Torx 20) each.
Note that two screws have spacers
(Nylon spacer, 5 mm).
Add spacers
only to these
two screws.
To Next Page
Loading...