79
24 .11. Connect the other cables to the One Connect box
1. Connect the following cables to the One Connect box according to the
wiring diagram. These cables were guided to the right display cavity in step
12.7 on page 32.
• 1x HDMI (S2)
• 1x Ethernet (S5)
• 1x Power (S8)
2. Fasten the cables to the steel structure with velcro straps to prevent rattling
noise and to have a nice looking system.
24.12. Remove the protective film from the screen edges
The screen comes with a protective film. Leave the film that covers the front
of the screen in place (for now). Remove the film from the edges by using the
flaps at the edges of the screen.
To Next Page
Loading...