Cisco SLM224G4S - Page 24

Port Management
Link Aggregation
Cisco Small Business SLM Series Smart Switches Administration Guide 20
2
Link Aggregation
The
Link Aggregation window displays the following fields:
• LAG — Displays the LAG ID number.
• Description — Displays the user-defined LAG name.
• LACP — Enables or disables Link Aggregation Control Protocol (LACP).
This box must be checked before the first port is added to the LAG.
• LAG Type — Specifies the type of LAG. The possible field values are:
- eth100M
- eth1000M
• Admin Status — Enables or disables traffic forwarding through the selected
LAG.
• Current Status — Indicates if the LAG is currently operating.
• Reactivate Suspended LAG — Reactivates a LAG if the LAG has been
disabled. A LAG is suspended if a Lock Port action has been applied on a
LAG member.