Cisco Small Business 200 Series Administration Guide

Administration: Time Settings
Configuring System Time
Cisco Small Business 200 Series Smart Switch Administration Guide 72
7
• Time Zone Acronym—Enter a name that will represent this time zone. This acronym appears in the
Actual Time field.
Daylight Savings Settings—Select how DST is defined:
• Daylight Savings—Select to enable Daylight Saving Time.
• Time Set Offset—Enter the number of minutes offset from GMT ranging from 1—1440. The default is
60.
• Daylight Savings Type—Click one of the following:
-
USA —DST is set according to the dates used in the USA.
-
European —DST is set according to the dates used by the European Union and other countries that
use this standard.
-
By dates —DST is set manually, typically for a country other than the USA or a European country.
Enter the parameters described below.
-
Recurring —DST occurs on the same date every year.
Selecting
By Dates allows customization of the start and stop of DST:
- From—Day and time that DST starts.
- To—Day and time that DST ends.
Selecting
Recurring allows different customization of the start and stop of DST:
• From—Date when DST begins each year.
-
Day —Day of the week on which DST begins every year.
-
Week —Week within the month from which DST begins every year.
-
Month —Month of the year in which DST begins every year.
-
Time —The time at which DST begins every year.
• To—Date when DST ends each year. For example, DST ends locally every fourth Friday in October at
5:00 am. The parameters are:
-
Day —Day of the week on which DST ends every year.
-
Week —Week within the month from which DST ends every year.
-
Month —Month of the year in which DST ends every year.
-
Time —The time at which DST ends every year.

Cisco Small Business 200 Series Specifications

General

Brand	Cisco
Model	Small Business 200 Series
Category	Switch
Language	English