Customizing Cisco SPA and Wireless IP Phones
Configuring Bluetooth (Cisco SPA525G/525G2 only)
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 82
3
STEP 6 Scroll to Bluetooth Profiles and press the Right Arrow key to enter the profile
screen.
STEP 7 Press Scan to scan for your headset.
NOTE Depending on the network environment (for example, the number of Bluetooth
devices and noise level), your Bluetooth headset may not appear on the found
devices list. Ensure the headset is powered on and has Bluetooth activated, and
retry the scan.
STEP 8 In the list of found devices, select your headset and press the Select button to edit
the profile.
STEP 9 Scroll to PIN and enter the PIN for your Bluetooth headset.
STEP 10 Scroll to Connect Automatically and press the Right Arrow key to turn to On.
STEP 11 Press Connect. The profile screen displays and a check mark appears next to the
headset if the connection was successful.
Pairing Your Cisco SPA525G2 with a Bluetooth-Enabled
Mobile Phone
This feature is based on the following standard Bluetooth profiles:
• Phone Book Access Profile 1.0
• Handsfree Profile 1.5
• Handset Profile 1.1
Make sure your mobile phone provides support for the above profiles. Cisco
provides a reference list of Bluetooth-enabled mobile phones supported with the
Cisco SPA525G2. See the Cisco support community at http://www.cisco.com/go/
smallbizsupport and also consult the latest Cisco SPA525G2 release notes,
available at cisco.com.
NOTE For more detailed instructions, including screen shots, see the
Cisco Small
Business SPA525/525G2 User Guide (SIP)
or the
Cisco Unified Communications
Manager Express for the Cisco Small Business IP Phone SPA525G/525G2 (SPCP)
User Guide
.
To pair your Cisco SPA525G2 with your Bluetooth-enabled mobile phone, you can
either initiate pairing from the Cisco SPA525G2, or from your mobile phone.
To Next Page
Loading...
