Using the Cisco SPA 500S
You can press a button on the Cisco SPA 500S to dial an associated line, pick up a call ringing on a line,
or transfer a call to the line.
The options available on the Cisco SPA 500S depend on the phone system configuration. Your phone
system might not provide all of the features mentioned in this document.
Monitoring lines
The colour of a line button gives you information about the line being monitored.
SIP system:
• Green (steady): the line is idle
• Green (blinking): the phone is in call-back mode
• Red (steady): the line is in use
• Red (slow blinking): the line is on hold
• Red (fast blinking): the line is ringing
• Orange (blinking): phone registration has failed
• Off: the line is not configured
0800 040 8888
working with daisy
www.daisygroupplc.com
v1 - 06/13
SPCP system:
• Green (steady): the line is in use
• Green (blinking): the phone is on hold
• Orange (blinking): the line is ringing
• Off: the line is not configured
To Previous Page
Loading...