Installing the Pillars, Crossbars, and Rear Kick Plate/Toe Cap
Page 34
© 2015 Cisco Systems, Inc. All rights reserved.
7
Install the side toe caps (left 700-43095-xx, right 700-43093-xx). Place the studs in the left toe cap
700-43095-xx into the holes in frame. Attach the x3 M4 nuts with lock washer 69-2793-xx to the stud
and tighten with the 7mm hex driver. Repeat for the right toe cap.
700-43095-xx
700-43093-x x
Hole
6x 69-2793-x x
Stud
To Next Page
Loading...
