Installing the Subwoofer and Speakers
© 2015 Cisco Systems, Inc. All rights reserved.
Page 43
1
Install the power amp 800-42333-xx on the power bracket on the left display frame. Install 2x M4 nuts
69-2793-xx on the threaded studs and tighten with a 7mm hex socket driver. Insert the power supply
341-0414-xx into the channel on the back of the bracket and plug the power supply into the bottom of the
amp.
800-42333-xx
2x 69-2793-xx
341-0414-xx
Cord from power supply plugs into amp
To Next Page
Loading...
