Starting Installation and Cabling of the Front Row Table
Page 54
© 2015 Cisco Systems, Inc. All rights reserved.
5
Hold the right outside table leg 800-41002-xx and attach the right Table leg connector 700-44718-xx
to connect the table leg. Attach the bracket to the table legs using 4x M8x16mm screws 69-2792-xx.
Connect the left table leg 800-41002-xx using the same procedure, using the 700-44719-xx left connector
and 4x M8x16mm screws 69-2792-xx.
800-41002-xx
700-44718-xx
4x 69-2792-x x
700-44719-x x
800-41002-xx
4x 69-2792-x x
Right side Left side
To Next Page
Loading...
