Starting Installation and Cabling of the Front Row Table
Page 60
© 2015 Cisco Systems, Inc. All rights reserved.
11
Attach the Microphone Connector and the switch to the cable management assembly. a. Connect
the 2x switch bracket 700-44758-xx to the POE Switch WS-C2960C-8PC-L with 2x #10-32 screws
69-100184-xx. b. Attach the switch and the Microphone Connector 800-40951-xx to the studs in the
cable management asembly using 4x M6 nuts 69-2800-x x. Note the correct orientation of the Microphone
Connector, with the single connector facing to the right, and the six connectors facing to the left.
WS-C2960C-
8PC-L
800-40951-xx - note six
connectors on right and
one connector on left
a. 2x 700-44758-
xx & 2x 69-100184-
b. 2x 69-2800-x x
b. 2x 69-2800-x x
To Next Page
Loading...
