Cisco TelePresence SX80 - Page 6

Installation guide for Cisco TelePresence SX80
78-100153-03A0rev1 | SEPTEMBER 2019 | © 2019 Cisco Systems, Inc. All rights reserved. 6
Connect Cisco TelePresence Precision 60
Connect the camera to one of the
codec’s camera inputs (HDMI).
Cisco recommends using the 1
st
camera input for the main camera.
Also connect the camera to the codec’s
2
nd
or 3
rd
Ethernet port, and to power.
6
Power
(100-240 VAC, 50/60 Hz)
Always use the provided
power cable and adapter
(12 V
DC
, minimum 3 A).
Connect Cisco TelePresence Precision 40 /
Cisco TelePresence PrecisionHD 1080p 4xS2
Power
(100-240 VAC, 50/60 Hz)
Connect the camera to one of the
codec’s camera inputs (HDMI).
Cisco recommends using the 1
st
camera input for the main camera.
Also connect the camera to the
codec’s dedicated camera control port
(D-SUB 9), and to power.
Always use the provided
power cable and adapter
(12 V
DC
, minimum 2 A).
Power
adapter
Power
adapter