Cisco TelePresence User Manual

3-16
Cisco TelePresence Content Server Release 6.2.1 Administration and User Guide
Chapter 3 Configuring a Cisco Unified Communications Manager SIP Trunk with a Cisco TelePresence
CUCM Integration with Content Server 6.2
Step 4 On the SIP Trunk Security Profile Configuration page, under SIP Trunk Security Profile Information,
enter the following:
Step 5 Click Save.
Field Setting
Name Enter SIP Trunk Security Profile or another name.
Description Enter SIP trunk security profile for Cisco TCS or another description.
Device Security Mode If you will not enable CUCM authentication and encryption, accept the
default of Non Secure.
X.509 Subject Name If you will not enable CUCM authentication and encryption, leave this
field blank.
If you will enable CUCM authentication and encryption, enter the name.
This name must match the Subject Name field for the SIP certificate on the
Cisco TCS.
Accept Out-of-Dialog
REFER
Check this check box.
Accept Unsolicited
Notification
Check this check box.
Accept Replaces Header Check this check box.

Cisco TelePresence Specifications

General

Brand	Cisco
Model	TelePresence
Category	Server
Language	English