Cisco WAP100 Series Administration Guide

Status and Statistics
Network Interfaces
Cisco WAP571/E Administration Guide 20
2
- Domain Name Server-2—The IP address of the domain name server 2
used by the WAP device.
- IPv6 Address—The IPv6 address of the WAP device.
- IPv6 Autoconfigured Global Address—The IPv6 auto-configured
global address.
- IPv6 Link Local Address—The IPv6 link local address of the WAP
device.
- Default IPv6 Gateway—The default IPv6 gateway of the WAP device.
- IPv6-DNS-1—The IPv6 address of the IPv6 DNS server 1 used by the
WAP device.
- IPv6-DNS-2—The IPv6 address of the IPv6 DNS server 2 used by the
WAP device.
These settings apply to the internal interface. Click the Edit link to change any of
these settings. You will be redirected to the IPv4 Setting page.
• Port Status—Displays the status for LAN interfaces.
• Interfaces—Number of the Ethernet interface.
- Link Status—Status of the Ethernet interface.
- Port Speed—Speed of the Ethernet interface.
- Duplex Mode—Duplex mode of the Ethernet interface.
- Green Ethernet Status—The status of the Ether interface.
Click the Edit link to change any of these settings. You will be redirected to the
Port Settings page.
• VLAN Status—Displays information for all existing VLANs, including:
- VLAN ID—Identifier of the VLAN.
- Description—Description of the VLAN.
- Eth—The interface is a tagged or untagged member of the VLAN
Click the Edit link to change any of these settings. You will be redirected to the
VLAN Configuration page.
• Radio Status—Displays information for the wireless radio interfaces,
including:

Cisco WAP100 Series Specifications

General

Brand	Cisco
Model	WAP100 Series
Category	Wireless Access Point
Language	English