EasyManua.ls Logo

Citiwell NG76AZ User Manual

Citiwell NG76AZ
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
114AZ Telescope
Instructions
and
Owner’s Manual
Question and Answer IconNeed help?

Do you have a question about the Citiwell NG76AZ and is the answer not in the manual?

Citiwell NG76AZ Specifications

General IconGeneral
BrandCitiwell
ModelNG76AZ
CategoryTelescope
LanguageEnglish

Summary

Parts of your 114AZ Telescope

WARNING! Safety Precautions

NEVER aim your telescope at the sun or even close to the sun! Instant and irreversible damage can occur, including blindness!

Introduction

WARNING! Choking Hazard

Small parts. Not suitable for children under 3 years.

ASSEMBLY

Initial Assembly Steps (Parts Inventory, Leg Attachment)

Steps 1-3 cover inventorying parts, extending tripod legs, and connecting legs to the yoke.

Attaching Accessory Tray and Optical Tube

Steps 4-5 cover attaching the accessory tray and mounting the optical tube assembly to the yoke.

Securing Fine Adjustment Rod and Finder Scope

Steps 6-7 cover securing the fine adjustment rod and attaching the finder scope to the main tube.

Eyepiece Installation and Barlow Lens Usage

Steps 8 and 11 cover inserting the eyepiece and using the 3X Barlow lens for increased magnification.

FINDER SCOPE ALIGNMENT

Alignment Procedures

Daylight Alignment and Focusing Steps

Steps 1-5 guide through positioning, focusing on an object, locking, and adjusting the finder scope.

THE ALTAZIMUTH MOUNT

ABOUT MAGNIFICATION

Magnification Calculation and Values

Details how to calculate magnification and provides values for different eyepieces with and without the Barlow lens.

Understanding Your Newtonian Reflector Telescope

Primary Mirror Care and Warnings

Emphasizes not adjusting or removing screws on the primary mirror end to avoid voiding the warranty.

USING YOUR TELESCOPE

Pre-Viewing Preparation and Environmental Factors

Steps 1-4 guide on taking the telescope outside, temperature equalization, choosing a location, and removing dust caps.

Viewing Session Start and Temperature Management

Step 5 advises starting with a low-power eyepiece and managing condensation from temperature changes.

Terrestrial Viewing Note

Using the Image Erector

Details how the image erector corrects orientation for terrestrial viewing, noting not to use it with the Barlow lens.

CARE AND CLEANING OF OPTICS

Optical Maintenance Best Practices

Covers dust prevention, managing condensation, using compressed air for cleaning, and when to seek professional help.

WHAT TO LOOK FOR IN THE NIGHT SKY

Celestial Object Viewing Guide

Recommends starting with prominent objects like the Moon and planets, offering tips for viewing each.

FREQUENTLY ASKED QUESTIONS

Common User Queries and Solutions

Addresses questions about viewing distance, lack of image, image darkness, and apparent object movement.

Related product manuals