Citizen AT9030-55L - Adjusting the Time;Calendar Manually

61
English
Adjusting the time/calendar manually
Manually adjust the time/calendar when the watch cannot receive the time signal.
1. Pull the crown out to position
1
.
Rotate the crown clockwise or counterclockwise
until the second hand indicates the time zone nearest
your current location. The hour, minute and 24-hour
hands will rotate to the current time set in memory
for the chosen timezone.
Press and release the upper right button
Ⓑ
to turn
summer time ON or OFF. Be sure to pay attention to
SMT-AU (automatic update) or SMT-MA (manual
update) position.
2. Press and hold the upper right button
Ⓑ
for
two or more seconds.
The second hand moves to the 30-second position.
3. Pull the crown out to position
2
.
The second hand moves to the 0 second position
indicating the time and calendar may be manually
adjusted.
Ⓑ
0 1 2
Ⓑ
0 1 2