59
English
You can adjust the watch by receiving the time signal any time when the time and
date are not correct or the reception result is "NO."
Receiving the time signal manually
(On demand reception)
1. Ensure that the crown is in position
0
.
2. Press and hold the lower right button
Ⓐ
for
two or more seconds.
The result of the last signal reception is displayed,
then a confirmation sound operates and on-demand
reception starts. (2-15 minutes)
•
The second hand points to "RX".
•
The watch will not receive the time signal when in a
low charge state as indicated by the second hand
moving in two second increments (the insufficient
charge warning).
• The signal station is different depending on the city
set. Confirm the current city setting.
Ⓐ
0 1 2
To Next Page
Loading...
