8
Setting the Time and Day
Before setting the time, make sure that the a.m./p.m. setting is correct.
1. Pull the crown out two steps to position
2
.
* Pull out the crown just as the second hand is at the 0 second position in order
to accurately align to the second.
2. Rotate the crown to set the time and day.
3. Return the crown to the normal position
0
in sync with a reliable time
source.
• You can not fast-forward the day setting. The day changes every time you advance the hour
hand 1 day (24 hours).
• Be sure to rotate the crown clockwise to set the hour and minute hands. If you rotate it
counterclockwise, the day may not change properly.
• The day changes during a.m. time.
Setting the Time and Calendar
To Next Page
Loading...
