48
Receiving time information
Leap second reception (time required: about 36 seconds - 13 minutes)
Reception for the leap-second-setting adjustment.
• You can also execute leap second setting manually. (page
73
)
1
Change the mode to [
TME
] or [
UTC
] and push the
crown in to position
0
.
2
Press and hold the lower right button
Ⓐ
for 7 seconds or more.
• Release the button after the second hand
points “
RX-TME
” and turns fully around to
point “
RX-TME
” again. Reception starts.
To Next Page
Loading...
