Citizen CC4054-68L - Checking and Adjusting Rollover Number

74
Information on satellite signal reception
1
Change the mode to [
SET
] and pull the crown out to
position
2
.
The second hand stops.
2
Press and hold upper right button
Ⓑ
for 2 seconds or
more.
Using the “0:00:00” position as the starting point, the minute
and second hands indicate the leap second setting.
When the leap second setting is “-37
seconds”
When the leap second setting is “-65
seconds”
7
7
The hands point to “0 minute 37
s e c o n d s ”.
The hands point to “1 minute 5
s e c o n d s ”.