96
Troubleshooting
Be sure to perform the following operations after All Reset.
1
. Correct the reference positions.
After All Reset, the watch is in the reference position adjustment
mode. Refer to step 4 and after on page
88
.
2
Set the world time.
Obtaining location information: See page
33
.
When you set it manually, execute also time and calendar setting
(page
45
or
80
).
Resetting the watch — All Reset
When the watch does not work properly, you can reset all the settings. If the power
reserve is insufficient, charge the watch first.
To Next Page
Loading...
