English
Quick Start Guide
Using Your Digital Blood Pressure Monitor
Always consult the included Guidebook for further details and instruction
Before applying your blood pressure cuff, be sure you have selected
the appropriate size cuff:
Adult Cuff ts arm circumference: 8-3/4” - 12-1/2” (22-32 cm)
[OPTION]
Large Adult Cuff ts arm circumference: 12-1/2” - 16-1/2” (32-42 cm)
A 15 minute resting period is needed to stabilize
the body prior to taking a reading.
No eating, drinking or smoking while resting.
Remove any constrictive clothing or jewelry that may interfere with cuff placement. Wrap the cuff snugly around your left arm. Position the
cuff’s bottom edge one inch ABOVE the elbow joint. Position the blue mark over the main artery (on the inside of your arm). You should be
able to insert one nger between your arm and cuff.
MEASUREMENT INSTRUCTIONS
• Many factors such as genetics, age, sex, altitude, physical activity,
anxiety, muscular development, certain medications or even the
time of day can inuence blood pressure.
• Blood pressure varies from moment to moment; even readings
taken after proper rest periods can vary. Home blood pressure
readings may vary as much as 10-20 points from ones taken at
your doctor’s ofce.
• Variations in your individual readings should only be interpreted by
your physician or trained health care professional.
• We encourage you to consult with your physician to achieve the
maximum benet from your blood pressure monitor.
Please read the Guidebook for this monitor prior to taking your rst reading.
If you have any questions or are experiencing difculties, please call the toll-free
Customer Service Help Line for further assistance at 1-866-326-1313.
#93-2039 05/11
©2011 Veridian Healthcare, LLC.
Citizen Self-Storing
Digital Blood Pressure Arm Monitor
Model # CH-456
• Plug the air hose connector rmly
into the air hose socket on the
main unit, as illustrated.
Plug the air hose
connector into the main
unit.
Place the cuff at the height of the heart.
( See page 20)
1
2
Air hose socketAir hose connector
Press the START/STOP switch (the blue switch).
3
* If the pressurization value exceeds 280mmHg, if pressurization feels
abnormal, or if you want to stop the measurement process, press the
START/STOP switch again. The cuff deates, and the power turns off.
• All digits displayed is an initial display, indicating that the monitor is
functioning normal.
• The cuff is pressurized automatically.
* If the unit judges that pressurization is insufcient, it automatically
repressurizes.
* is displayed when a pulse is detected.
* When you want to stop measurement, press the
“START/STOP” switch. The cuff is deated and
measurement stops.
The measurement results are displayed.
4
Finishing measurement.
• Press the “START/STOP” switch to turn the monitor off.
5
START/STOP Switch
• Once measurement is complete, the
cuff deates and the measurement
results (systolic/diastolic blood
pressure values, pulse) are displayed.
* Provided there is no error in the
measurement results, they are
stored automatically.
Body Movement
Indicator
(
See page 19)
Irregular Heartbeat
(IHB) Indicator
(
See page 19)
PLEASE NOTE
( Consult your Instruction Manual for details regarding Irregular
Heartbeat (IHB) Indicator and Body Movement Indicator
)
AUTOMATIC POWER OFF FEATURE
• After taking the blood pressure measurement, pressing the “START/STOP” switch
will turn the monitor off. However, if you do not press the switch, the monitor’s
Auto OFF function will automatically turn the monitor off after 3 minutes.
To Next Page
Need help?
General
