Citizen CH-456 - Memory Functions; Calling Up Stored Data

- Eng 14 -
Ǒ¡Ûȣ
Pyɫɫɤɢɣ Français Español
English
CALLING UP THE DATA STORED IN MEMORY
90 measurement results can be stored in Memory.
The average value is calculated automatically to help you manage your daily health.
1 Press the Memory switch once.
* Example of display when the
Memory switch is pressed.
indicating the average value appears at the bottom of the display. Then the
average value, based on the last three measurements, is displayed.
* ( and the average value do not appear if there are two or fewermeasurements
stored in memory.)
2 If you press the Memory switch again, past measurement data are
displayed.
Each time you press the switch, the measurement data are displayed in order
from the most recent to the oldest.
* You can fast-forward the data numbers in display by pressing and holding the
Memory switch.
* Example of display when the
Memory switch is pressed.
The data number is displayed
before the measurement results.
Memory switch
00CH-456All.indbEng-142015/02/1918:51:43