25
Chapter 2 Printer Operation
7. Align the media with the left xed media guides (2 places), and
align the right movable media guide with the media width.
Note: Make sure to set the media following the procedure as
indicated here. If not, it may jam.
Movable
media guide
Fixed media guide
Fixed media guide
8. Lower and lock the printer cover. Align it with the width of
the media that has been set, then set the media width and
media thickness adjustment dials.
See “Chapter 3 Printer Adjustments”.
Media width adjustment
Media thickness adjustment
9. With the power switched on, push the FEED key to feed the
media. It will halt at the next print start position.
Setting the Media
Adjusting the Transparent
sensor (p.46)
Adjusting the Reective sensor
(p.47)
To Next Page
Loading...
