Citizen CT-S251 - 3.6 Connecting the Cash Drawer

—29—
1. Turn off the power.
2. Confirm the orientation of the cash drawer kick-out cable connector and connect it
to the cash drawer kick-out connector at the back of the printer.
3. Remove the screw for the ground wire.
4. Screw the cash drawer’s ground wire to the body of the printer.
3.6 Connecting the Cash Drawer
CAUTION
 Connect only the cash drawer kick-out cable connector to the cash drawer kick-out
connector. (Do not connect a telephone line.)
 Signals cannot be output from the cash drawer kick-out connector while printing.
 Hold the connector of the drawer kick cable perpendicular and straight when connecting or
disconnecting it. Doing it at an angle may cause the connector to misconnect.
Cash drawer kick-
out connector
Cash drawer kick-out cable
connector
Cash
drawer kick-
out cable
connector
Cash
drawer
kick-out
connector
Ground wire
Screw
for
ground
wire