Citizen CT-S280 - Page 130

- 129 -
(2) 2nd byte (Error occurrenceinformation)
Bit Status Hex. Decimal
0
Undefined
- -
1
Undefined
- -
NoMechanism error occurred.
NoBMdetectionerroroccurred.(onlywhenBMpaperisselected)
No presenter error occurred. (only when presenter function is
enabled.)
00H 0
2
AMechanism error occurred.
ABMdetection error occurred.(only whenBMpaperis selected)
A presenter error occurred (only when presenter function is
enabled.)
04H 4
Auto cutter error notoccurred
00H 0
3
Auto cutter error occurred
08H 8
4
Unused
00H 0
Unrecoverable error notoccurred
00H 0
5
Unrecoverable error occurred
20H 32
Auto recoveryerror notoccurred
00H 0
6
Auto recoveryerror occurred
40H 64
7
Unused
00H 0
*Bit 2: Incaseof MSW3-8=ON, it is generated bycover-open.
AtBM/Label model, itis generated byBM/Label-error.
Atpresenter model, itis generated atpresenter error.
*Bit 3: Ifthiserror occurred becauseofa paper jam, for example, remove thecause ofthe error,andthen
DLEENQn(1 n2)can be usedto recover fromthe error.However,itisnot possible torecover from
any error dueto acircuit problem (e.g.,broken wire).
*Bit 6: Ifa head overheaterror isdetected, theprintingisstoppeduntil thehead temperature falls. At this
time,bit 6=1.
(3) 3rdbyte (PaperSensor information)
Bit Status Hex. Decimal
Paper found byPaper Near-end Sensor
00H 0
0,1
Paper not foundbyPaper Near-end Sensor
03H 3
Paper found byPaper-end Sensor
00H 0
2,3
Paper not foundbyPaper-end Sensor
0CH 12
4
Unused
00H 0
5
Undefined
- -
6
Undefined
- -
7
Unused
00H 0