Citizen CT-S280 - Page 201

- 200 -
CT-S300
• Setting MSW 4 (a=4)
n b (Set Value) Function
48 (Default)
At the selection of Black mark paper, disables auto
end-measurement.
1
49
At the selection of Black mark paper, enables auto
end-measurement.
48(Default)
At the selection of Black mark paper, sets sensor position to
be on the printing side.
2
49
At the selection of Black mark paper, sets sensor position to
be on the back of the printing side.
3 48 (Default) Reserved
4 48 (Default) Reserved
5 48 (Default) Reserved
6 48 (Default) Reserved
7 48 (Default) Reserved
48 (Default) Forcible partial cut disabled.
8
49 Forcible partial cut enabled (full cut by command: enabled).
* MSW 4-1, -2 are valid when MSW 3-4 is ON.