Citizen CT-S280 - Page 341

- 340 -
CT-S281
n Type of Printer ID Specification Value (Hex.)
1, 49
Model ID
CT-S281 31H
2, 50
Type ID Refer to table “Type ID” below
3, 51
ROM version ID Differs by ROM version.
• Type ID If n=2, 50 is specified:
Bit Meaning Hex. Decimal
Not equipped for 2 byte code support 00H 0
0
Equipped for 2 byte code support 01H 1
1 Fixed 00H 0
Thermal paper 00H 0
2
Black mark paper/ Label paper
(when Black mark paper/ Label paper is selected)
04H 4
3 Reserved 00H 0
4 Fixed 00H 0
5 Reserved 00H 0
6 Reserved 00H 0
7 Fixed 00H 0
n = 4, 52 specified (only for B.M/Label specs)
The Black mark length/label gap length and mark interval/label length
currently used are returned in 4-byte code. All fractional parts in
millimeters are rounded off.
Byte 1 + Byte 2 x256 = Black mark interval/label length
Byte 3 + Byte 4 x256 = Black mark length mm/label gap length
BM paper Label paper
• Printer information configuration on and after transmitted n=65 is shown
below.
n
Kind of Printer
Information
Information
65 Firmware version Differs by firmware version.
66 Manufacturer name CITIZEN
67 Model name CT-S281
69
Kinds of multi-language
fonts
Japanese Kanji specifications:
KANJI JAPANESE
112 State of DSW
Refer to table “DSW” below
(only serial model)
• DSW If n = 112 is specified:
Bit Function Hex. Decimal
Dip switch [DSW8] is OFF 00H 0
0
Dip switch [DSW8] is ON 01H 1
Dip switch [DSW7] is OFF 00H 0
1
Dip switch [DSW7] is ON 02H 2
Dip switch [DSW6] is OFF 00H 0
2
Dip switch [DSW6] is ON 04H 4
Dip switch [DSW5] is OFF 00H 0
3
Dip switch [DSW5] is ON 08H 8
Dip switch [DSW4] is OFF 00H 0
4
Dip switch [DSW4] is ON 10H 16
Dip switch [DSW3] is OFF 00H 0
5
Dip switch [DSW3] is ON 20H 32
Dip switch [DSW2] is OFF 00H 0
6
Dip switch [DSW2] is ON 40H 64
Dip switch [DSW1] is OFF
00H 0
7
Dip switch [DSW1] is ON 80H 128
*only serial model
(1)
(2)
(1)
(2)