- 341 -
CT-S300/CT-S310
n Type of Printer ID Specification Value (Hex.)
1, 49
Model ID
CT-S300,CT-S310 35H
2, 50
Type ID Refer to table “Type ID” below
3, 51
ROM version ID Differs by ROM version.
4, 52
Black mark Length Depends on Black mark paper (mm)
• Type ID If n=2, 50 is specified:
Bit Meaning Hex. Decimal
0 Equipped for 2 byte code support 01H 1
1 Equipped with auto cutter 02H 2
Thermal paper
00H 0
2
Black mark paper
(when Black mark paper is selected)
04H 4
3
Undefined
-- --
4
Unused
00H 0
5
Undefined
-- --
6
Undefined
-- --
7
Unused
00H 0
n = 4, 52 specified (only for B.M specs)
The Black mark length and mark interval currently used are returned in
4-byte code. All fractional parts in millimeters are rounded off.
Byte 1 + Byte 2 x256 = Black mark interval
Byte 3 + Byte 4 x256 = Black mark length mm
Black mark paper
• Printer information configuration on and after transmitted n=65 is shown
below.
n
Kind of Printer
Information
Information
65 Firmware version Differs by firmware version.
66 Manufacturer name CBM,CITIZEN
67 Model name CT-S300, CT-S310
69
Kinds of multi-language
fonts
Japanese Kanji specifications:
KANJI JAPANESE
Hangul specification: KOREA
Chinese specifications: CHINA GB18030
112 State of DSW
Refer to table “DSW” below
(only serial model)
• Sends printer information specified by n=65 or more.
Hex. Number of Data
Header 5FH 1
Data 20H to 7FH Subject to item to be responded
NULL 00H 1
• DSW If n = 112 is specified:
Bit Function Hex. Decimal
Dip switch [DSW5] is OFF 00H 0
0
Dip switch [DSW5] is ON 01H 1
Dip switch [DSW6] is OFF 00H 0
1
Dip switch [DSW6] is ON 02H 2
Dip switch [DSW7] is OFF 00H 0
2
Dip switch [DSW7] is ON 04H 4
Dip switch [DSW8] is OFF 00H 0
3
Dip switch [DSW8] is ON 08H 8
4 Reserved 00H 0
5 Reserved 00H 0
6 Fixed 40H 64
7 Fixed 00H 0
*only serial model
(1)
(2)
To Next Page
Loading...
