- 344 -
CT-S4000
n Type of Printer ID Specification Value (Hex.)
1, 49
Model ID
CT-S4000 55H
2, 50 Type ID Refer to table “Type ID” below
3, 51 ROM version ID Differs by ROM version.
4, 52
Black mark/ Label
Length
Depends on Black mark paper/ Label
paper (mm)
• Type ID If n=2, 50 is specified:
Bit Meaning Hex. Decimal
0 Equipped for 2 byte code support 01H 1
1 Equipped with auto cutter 02H 2
Thermal paper 00H 0
2
Black mark paper/ Label paper
(when Black mark paper/ Label paper is selected)
04H 4
3 Undefined -- --
4 Unused 00H 0
5 Undefined -- --
6 Undefined -- --
7 Unused 00H 0
n = 4, 52 specified (only for B.M/Label specs)
The Black mark length/label gap length and mark interval/label length
currently used are returned in 4-byte code. All fractional parts in
millimeters are rounded off.
Byte 1 + Byte 2 x256 = Black mark interval/label length
Byte 3 + Byte 4 x256 = Black mark length mm/label gap length
BM paper Label paper
• Printer information configuration on and after transmitted n=65 is shown
below.
n
Kind of Printer
Information
Information
65 Firmware version Differs by firmware version.
66 Manufacturer name CITIZEN
67 Model name CT-S4000
69
Kinds of multi-language
fonts
Japanese Kanji specifications:
KANJI JAPANESE
Hangul specification: KOREA
Chinese specifications: CHINA GB18030
112 State of DSW
Refer to table “DSW” below
(only serial model)
• Sends printer information specified by n=65 or more.
Hex. Number of Data
Header 5FH 1
Data 20H to 7FH Subject to item to be responded
NULL 00H 1
• DSW If n=112 is specified:
Bit Function Hex. Decimal
Dip switch [DSW5] is OFF
00H 0
0
Dip switch [DSW5] is ON 01H 1
Dip switch [DSW6] is OFF 00H 0
1
Dip switch [DSW6] is ON 02H 2
Dip switch [DSW7] is OFF 00H 0
2
Dip switch [DSW7] is ON 04H 4
Dip switch [DSW8] is OFF 00H 0
3
Dip switch [DSW8] is ON 08H 8
4 Reserved 00H 0
5 Reserved 00H 0
6 Fixed 40H 64
7 Fixed 00H 0
*only serial model
(1)
(2)
(1)
(2)
To Next Page
Loading...
