EasyManua.ls Logo

Citizen CX 165 - Log-in Function

Citizen CX 165
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 20 -
should be covered with water all the time. Overflow of water in container can be removed
with automatic pump or pipette.
To minimize all humidity measurements inside chamber and influence of blast air
during opening side doors the dosing liquid from pipettes must be done through a hole in
upper cover of weighing chamber.
7.2. Log-in function
The operator has own access code to internal menu. The password system is defined by
administrator. Password can contain max 6 digits.
The balance program enables to declare:
One administrator who is authorised to use all sets and programme functions,
change the passwords – own and user
One user who is authorised to sets and the balance functions determined by
administrator
Setting password and access authorization
After set the password and access parameters (parameter P9 13 Password
protection) write the password for administrator
If the admistrator password is different from “0” the program wants administrator
password during enter for the parameter
P9 13 Password protection.
Every enter this parameter the software demands administrator password, after
writting correct password it is possible to set the parameter P9 13 Password
protection
If the password is not correct the command about wrong password is show and
the balance displays previous window
Dependly on setting the password is shown as digits or stars (start value each
digit = 0)
According to point 6.1.1 of the manual enter the menu P9 Others

Related product manuals