- 62 -
18.2. Non-standard printout
Proced
ure of creating non-standard printouts:
− user can create own 4 printouts,
− give the number of the text which starts the printout eg. Printout 1 Start – 1 and
text number which finishes the printout eg. Printout 1 Stop – 40. In this case texts
from 1 to 40 are printed.
− And then write text in the lines 1 ÷ 40.
It is recomended to use PC keyboard what is simplier and faster way.
− Non-standard printouts can overlap each other:
Printout 1 Start – 1
Printout 1 Stop – 40
Printout 2 Start – 20
Printout 2 Stop – 40
Non-standard printout can be created by Edition of the printout.
During manual writting give all special signs as CRLF, tabulator etc. If function Printout
Edition is used all these values can be selected in form of ready elements. They are
transmitted from one side Line of selection to the other window Printout
Draw. 61. Menu printouts –the function activation
Non-standard printout can include:
− Variable dependly on work mode and other user necessities (mass, date, Project
No)
− Stable texts in user menu
Non-standard printout can include not more than 640 signs recorded as 80 texts 8 signs
each (from the parameter Text 1 to Text 80). User can design 4 non-standard printouts
To Next Page
Loading...
