- 69 -
20. COOPERATION WITH LABEL PRINTERS CITIZEN CLP-521
You sho
uld follow the steps below to assure the proper operation with the label printer. Use
the program „ETISOFT” to designer your own label
label size
a kind and number of data to place on the label
Notice:
In order to print properly interial (inside balance) variable, you should predict a
proper number of characters for each variable. (charts 2, 3,and 4).
After giving it an original name, save the label on a computer hard drive. (alphanumeric
characters). Download the label to the CITIZEN CLP-521 printe
- Set RS232 baud rate in the printer to 9600 bits per second
- example of label named “Etykieta01”
Draw 65. Label example
Design special printout which enables labels according to the design.
Set the parameters .:
− Printout number
− Place of start and stop of the printout (start and stop)
− After each measurement 3 labels should be printed
To Next Page
Loading...
