16
1
Pull the crown out to position
2
.
Pull out the crown just as the second hand is at the reference
position in order to accurately align to the second.
2
Rotate the crown to adjust the time.
• Move the minute hand ahead of the correct time by 5
“minutes” and then return the hand to the correct “minutes”.
This will minimize the effect of gear play and will provide
more accurate hand movement.
• The 24-hour hand (located at the 9:00 subdial) moves in
relation to the hour hand. Determine whether it is a.m. or
p.m. by observing the 24-hour hand.
3
Push the crown in to position
0
to finish the
procedure.
Setting the time
Make sure that the watch is not wet before operating the crown or any buttons.
To Next Page
Loading...
