17
English
Setting the date
1
Pull the crown out to position
1
.
2
Rotate the crown counterclockwise to set the date.
• The date does not change when you rotate the crown
clockwise.
3
Push the crown in to position
0
to finish the
procedure.
The date must be manually adjusted for months shorter than 31-days. You will
need to adjust the date at the start of March, May, July, October and December.
• Do not adjust the date between 9 p.m. and 1 a.m. If you change the date during
this time, the date may not change the following day.
Make sure that the watch is not wet before operating the crown or any buttons.
To Next Page
Loading...
