Citizen Eco-Drive B6 Series - Aligning Chronograph Hands

20
Using the Chronograph
When the 1/5 chronograph second hand does not
return to the reference position
If the 1/5 chronograph second hand does not return
to reference position even when reset, perform the
following procedures to align the 1/5 chronograph
second hand with the reference position.
•
Time is stopped while aligning with the reference position. Set the time after aligning.
Set the watch to correct the reference position
1
Pull the crown out to position
2
.
2
Press and hold the upper right button
Ⓑ
for 3 seconds
or more.
• The watch is now set to correct the reference position.
Reference
position