31
1. Ensure that the crown is in position .
2. Press and hold the lower right button
for two or more
seconds.
The second hand moves to “RX” and the watch starts receiving.
After receiving the time signal, the second hand will move
normally.
• It takes from two to fifteen minutes to complete the time signal
reception.
Successful signal
reception
The time will be updated and the watch
will resume normal operation.
Failed signal reception Normal operation resumes with the
previously set time.
To cancel the reception
Press and hold the lower right button
for two or more seconds.
Cancel the reception and the current time will be indicated.
While receiving the
signal
Receiving the time signal manually (On demand reception)
To Next Page
Loading...
