5050
The watch may not work properly if it is affected by strong shock or
static electricity; the hands do not stop or the watch does not work
though the watch is sufficiently charged. In this case, perform All
Reset.
Caution
• Be sure to charge the watch fully before performing All Reset.
(Pages
10
to
15
)
• After performing All Reset, the settings change as follows.
You must correct the current reference position, then city
setting and time before using the watch.
• Calender:
• City:
• Summer time:
January (leap year)
London
“OFF” for all cities (automatic switching)
Resetting the watch—All Reset
Troubleshooting Troubleshooting
To Next Page
Loading...
