Citizen H145 - Safety precautions; Explanation of warning symbols

2/3
H145 Abbreviated instruction
Table of time zones and representative areas
• When using the watch in an area not listed in the table, select an area name in
the same time zone.
• It may be difficult to receive signals in certain environment where it is hard for
signals to reach.
Time zone
Second
hand
Area name Representative area Signal station
0
0
LON
*
London
Germany
+1
2
PAR
*
Paris
+2
4
ATH
*
Athens
◆
Germany +3
7
MOW/RUH
*
Moscow/Riyadh
+4
9
DXB Dubai
+5
11
KHI Karachi
◆
China
+5.5
14
DEL Delhi
+6
16
DAC Dhaka
+7
18
BKK Bangkok
+8
21
BJS Beijing
China
+9
23
TYO Tokyo
Japan
+9.5
25
ADL Adelaide
◆
Japan
+10
28
SYD Sydney
+11
30
NOU Noumea
+12
32
AKL Auckland
-11
35
MDY Midway
◆
USA -10
37
HNL Honolulu
-9
39
ANC
**
Anchorage
-8
42
LAX
**
Los Angeles
USA
-7
44
DEN
**
Denver
-6
46
CHI
**
Chicago
-5
49
NYC
**
New York
-4
51
SCL Santiago
◆
USA
-3
53
RIO Rio de Janeiro
-2
56
FEN Fernando de Noronha
◆
Germany
-1
58
PDL
*
Azores
• The time zone in the table is based on UTC (Coordinated Universal Time).
• Countries or regions may change time zones for various reasons.
• For an area with * or **, indication of summer time and that of standard time
are linked together.
• Areas with
◆
mark are out of receivable range and signals cannot be received. (The
watch tries to receive signals from the target signal station though.)
Receiving the signal manually (on-demand reception)
• It takes 2-15 minutes to finish reception.
1.
Push the crown in to position
0
.
2.
Press and hold the lower right button
A
for 2 seconds or more.
The second hand points “RX” and signal reception starts. The second hand
returns to normal movement after finishing reception.
Reception was successful
The time will be updated.
Reception failed
The time is not corrected and the previously set time
resumes.
• Press and hold button
A
for 2 seconds or more to cancel reception.
Switching the summer time and standard time
1.
Pull the crown out to position
2
.
2.
Rotate the crown to change the summer time setting.
Summer
time setting
Description
SMT ON
Summer time is indicated.
The watch automatically switches between standard time and
summer time depending whether the summer time check signal is
contained or not in the signal received.
SMT OFF
The standard time is indicated.
The standard time is kept indicated even when the summer time
check signal is received.
3.
Push the crown in to position
0
to finish the procedure.