Why does my Citizen Watch show the wrong time after successful reception?
If your Citizen Watch displays an incorrect time and date after successful reception, verify the World Time setting. If the time is still incorrect after manual reception 1, perform manual reception 2. Check and correct the current reference position, displayed time (Summer Time or standard time), and leap second and rollover number settings.
What to do if my Citizen H990 Eco-Drive Satellite Wave reception is unsuccessful?
If your Citizen Watch fails to receive a signal, ensure the crown is pushed into position. Try moving to a location where the satellite signal isn't obstructed and away from objects emitting noise. Face the dial towards the sky when attempting reception. Also, adjust the watch's orientation or lean it while keeping the dial facing the sky. Removing the watch from your wrist may also help. If near mobile telephone base stations or transmission facilities, move away from them. If the second hand moves once every two seconds, charge the watch, as this indicates it cannot receive the time signal. If these steps do not work, try performing a manual reception.
General| Case Material | Titanium |
|---|---|
| Water Resistance | 200 meters |
| Dial Type | Analog |
| Power Reserve | 6 months |
| Crystal | Sapphire |
| Band Material | Titanium |
| Accuracy | ±15 seconds per month |
| GPS Synchronization | Yes |
| Power Reserve (Power Save Mode) | 2 years |
| Movement | Eco-Drive |
| Features | World time, Chronograph |
| Functions | Time, Date, Chronograph |
Explains DANGER, WARNING, CAUTION levels and operational symbols for safe use.
Initial setup steps including checking power, setting world time, and signal reception.
Labels and identifies all parts of the watch for user reference.
Guidance on charging the watch via light, including charging time by environment.
Procedure to check the watch's remaining power level using the second hand.
How to set world time cities and adjust Summer Time settings.
Conditions and methods for receiving satellite time signals.
Explains manual reception methods and checking reception results.
Adjusting leap seconds and managing rollover number settings for accurate timekeeping.
Step-by-step guide for manually setting the watch's time and calendar.
How to check and correct the watch's reference positions for accurate display.
Solutions for problems like reception failure, non-working hands, or incorrect time display.
Guidelines for Eco-Drive watch care, cell handling, and water resistance levels.
Instructions for daily and periodic maintenance to ensure watch longevity and function.
Details about satellite signals and luminous paint features on the watch.
Details on model, accuracy, operating ranges, battery, and additional functions.
To Next Page