Citizen Red Arrows AT8060-50E - Receiving Time Signal Manually; Adjusting Time;Calendar Manually

44
45
English
Adjusting the time/calendar manually
Receiving the time signal manually (On demand reception)
• Thewatchwillnotreceivethetimesignalwheninalowchargestateasindicatedby
the second hand moving in two second increments (the insufficient charge warning).
• Ifthecurrentlocationisdifferentfromthecityyouset,thewatchwillnotreceivethe
time signal.
• Pressandholdthelowerrightbutton
Ⓐ
for two or more seconds to cancel the signal
reception.
• Thereceptionoperationiscompletewhennormaltimeindicationresumes.
Ⓑ
0 1 2
Ⓑ
0 1 2
Manually adjust the time/calendar when the watch cannot receive the time signal.
1.
Pull the crown out to position 󱦯 .
2.
Press and hold the upper right button Ⓑ for
two or more seconds.
The second hand moves to the 30-second position
and the chronograph minute hand moves to the
60-minute position.
3.
Pull the crown out to position 󱦱 .
The second hand moves to the
0
second position
indicating the time and calendar may be manually
adjusted.