198
INJECTION
TOOLS
- Flywheel locating peg : 4507-T.A
- Mounting plate locating peg : 4507-T.S1 Tool kit 4507-T
- Camshaft peg : 4507-T.S2
CHECKS
- Peg the flywheel.
- Visually check the pegging of the camshaft and injection pump pulleys, or check using
the tools 4527-T.S1 and 4527-T.S2.
SETTING THE INJECTION PUMP.
- Peg :
• The flywheel.
• The camshaft pulley.
- Fit the pump and tighten to 2 m.daN.
- Peg the pump mounting plate.
- Fit the pump drive pinion together with the timing belt. Tighten to 2 m.daN.
CHECKING AND SETTING THE BOSCH MECHANICAL INJECTION PUMP
B1HP0YAC
Engine : VJZ -VJY - VJX
SAXO - XSARA
To Next Page
Loading...
