172
CLUTCH
GEARBOX
DRIVESHAFTS
CLUTCH : CHECKS AND ADJUSTMENTS
Mechanically operated push-action clutch (adjustable)
HFX-KFW-NFT-NFX-VJX
KFW-NFU
Gearbox
Engines
SAXO Adjustable
Non-adjustable*
XSARA
MA/5
(*) See page 175)
ESSENTIAL : If the clutch control is new, squeeze the cable sheath before adjusting by declutching
successively a minimum of 20 times.
Checks
NOTE : Adjustable steering wheels should be put into the low position
- Record the measurement ‘‘X’’ between positions L1, pedal at rest, and L2, pedal fully depressed.
- Measurement ‘‘X’’ should be : (Pedal travel).
Adjustments.
- If the measurement is incorrect, adjust the clutch pedal travel "X".
- Loosen the lock nuts (1).
- To adjust the travel to conform with the measurements indicated above, either loosen or tighten the nut (2)
(Tighten the nut to increase the travel, and loosen it to decrease the travel.)
- Tighten the lock nut (1).
SAXO
135 ± 5 mm
B2BP00GCB2BP023C
SAXO - XSARA
To Next Page
Loading...
