177
CLUTCH
GEARBOX
DRIVESHAFTS
CLUTCH : CHECKS AND ADJUSTMENTS
B2BP03QD
For the adjusting device to operate correctly, it
is necessary that :
The pedal is at rest (against its upper stop) The
locking sleeve (1) is slightly compressed, the
rollers (2) are free, the outer cable (3) length
may vary.
Engines : LFX - RFN - RFS - WJX - RHY - RHZ
As soon as the pedal is applied, the attaching
end-piece (4) leaves the sleeve (1) which
moves back. The rollers, pushed by spring (5)
jam the system. The cable behaves like a
conventional cable.
The pedal returns to rest on its upper
stop.Attaching end-piece (4) pushes sleeve (1)
which frees the rollers.
Outer cable (3), kept extended by the spring (6)
becomes :
- Shorter if the clutch disc is worn.
- Longer if the outer cable has been compressed.
Operation Clutch disengagement phase Engagement / adjustment phase
NOTE : The pedal gear has a non-adjustable assisting device.
XSARA - XSARA PICASSO
To Next Page
Loading...
