225
AXLES
SUSPENSION
STEERING
XSARA - All TypesREAR AXLE
Tightening torques (m.daN)*
(1) Anti-roll bar lever 3.2 ± 0.3
(2) Anti-roll bar
(3) Transversal torsion bars
(4) Rear crossmember flanges 8.3 ± 0.8
(5) Front mountings 5.5 ± 0.5
(6) Rear mountings 4.5 ± 0.4
(7) Anti-vibration clamp.
(8) Damper pin 9.6 ± 0.9
(9) Stub axle nuts (lubricated) 18.5 ± 1
NOTE
- The RH torsion bar can be identified by 1 paint line.
- The LH torsion bar can be identified by 2 paint lines.
B3DP04SP
To Next Page
Loading...
