Ground clearance
239
AXLES
SUSPENSION
STEERING
A > B = Negative figure: – = TOE-OUT
A < B = Positive figure: + = TOE-IN
WARNING
AXLE GEOMETRY
Measurements at reference height (continued). Compress the suspension to obtain the calculated values.
Vehicle all types
Front axle Rear axle
Vehicle Tracking Castor King pin inclination Camber Tracking Camber
Adjustable Non-adjustable
All Types
0 mm ± 1mm 4.8 mm ± 1mm
0 ± 0°09’
3° ± 20’ 10° 45’ ± 30’ 0° ± 30’
0° 43’ ± 0° 09’
1°20’ ± 20’
Vehicle all types CRD (Difficult Road Conditions)
Front axle Rear axle
Vehicle Tracking Castor King pin inclination Camber Tracking Camber
Adjustable Non-adjustable
All Types
-1 mm ± 1mm 3.8 mm ± 1mm
- 0°09’ ± 0°09’
2°93’ ± 20’ 10°42’ ± 30’ 0°12’ ± 30’
0°34’ ± 0° 09’
- 1°23’ ± 20’
NOTE : When checking axles, the vehicle should be at reference height.
(*) = Fuel tank full.
XSARA PICASSO - All Types
All Types
Unladen (*)
150 mm (Minimum value)
To Next Page
Loading...
